网站转让 → 您的公司名称

沟盖板产品尺寸
Dimensions of trench cover plate products
选用说明： 1、沟盖板扁钢方向为承重（支撑）方向，按沟（井）宽留间隙定扁钢长度L;
Selection instructions: 1. The direction of flat steel of trench cover plate is load bearing (supporting) direction, and the length of flat steel L is determined according to the wide clearance of trench (well).
2、按沟（井）长排版，取符合加工模数的标准板宽995mm，板间留间隙5mm;
2. According to the length of ditches (wells), the standard width of plate is 995mm, and the clearance between plates is 5mm.
3、沟（井）长余下不足1米部分靠模数定尺寸；
3. Dimensions of the remaining less than 1 meter long ditches (wells) are determined by modulus.
4、根据沟（井）宽及承载要求选定钢格栅板型号。
4. Select the type of steel grille according to the width of ditch (well) and load-bearing requirement.
5、建议选择标准尺寸沟盖板进行设计施工，其他规格可定做。
5. It is suggested to select standard size trench cover plate for design and construction. Other specifications can be customized.